Back to look at more products
   

 		  
   
 

 

Routout 3 Axis CNC Plug and Play Controller.

  
Routout CNC 3 Axis Box Plug and Play Stepper Motor Controller
  

Description and Specification.


Routout 3 Axis Plug and Play CNC Controller

The Routout CNC 3 Axis stepper motor drive box has many uses including for CNC retrofitting / robot control or driving you own CNC machine. It is very simple to wire simple connect up the motor connections and power supply, plug into your PC via the Printer Port and run your chosen CAD / Cam software. The Routout 3 Axis Plug and play driver is supplied with the Routout CNC software but is compatible with all of the popular CNC Printer port driven software, including but not limited to Routout CNC, Mach, Turbo CNC, KCam etc the list go on …

The Routout CNC 3 Axis stepper motor driver Box will drive 3 X 2.5 Amp stepper motors and can be set to Full / Half / Quarter / Eighth stepping (Default configuration when shipped Eighth step)

All built controllers are supplied with Routout CNC software. For more information on the software. Please visit the software page from our products page.

 

Features.

  • 2.5 A Output Drive Capabilities.
  • 12 – 13.8 Volts Power Supply.
  • Small Case Size foot print only 120mm x 75mm X 55mm
  • Internal 5V logic driver onboard (no need for 5v Supply)
  • Connection for Home Switches.
  • The Resolution can be change from the default setting via the internal jumpers ( please see the below table )
  • Simply plug and Play Very little wiring just connect motors and power supply
  • Supplied with Routout CNC software.
  • Supplied with all motor, Power Supply & Home switch connectors.

To download the full spec sheet on the controller please click on the link below:

3 Axis Plug and play controller PDF PDFLOGO


If you are looking for Suitable stepper motors please look at our Products page where we stock 1.9 Amp bipolar Stepper Motors.


Computer minimum Requirements :

Windows 98,2000,XP
P2 - 500 Mhz or greater
1 spare Printer Port.

If you require any further information then please do not hesitate to contact us on Tel: (01269) 841230

Dedicated technical Help Line (0121) 2884066

 

Price £300.00 Including P&P to the UK Only

Simple to understand connection Diagrams.

For full details please download the manual by clicking on the image below.
 
 
               
   
Plaque Cut out of 15mm Oak using Routout CNC.
        
   
       
   

Plaque Engraved using Routout CNC with engraving head.

        
   
       
               
   
Drawing of a Tool Holder Imported into Routout CNC
        
   
   
               
   
Tool Holder cut from 10mm Aluminium using Routout CNC
      
   
       
   
Various Wooden cutouts using Routout CNC