Back to look at more products
   

 		  
   
 

 

Routout 2 / 3 Axis 6 Amp High power CNC Plug and Play Plasma Controller.

  
Routout CNC 6 Amp 2 / 3 / 4 Axis Boxed Plug and Play Stepper Motor Controller
  

Description and Specification.


The Routout CNC 2 / 3 Axis stepper motor drive box has many uses including for CNC retrofitting / robot control or driving you own CNC machine. It is very simple to wire simple connect up the motor connections and power supply, plug into your PC via the Printer Port and run your chosen CAD / Cam software. The Routout CNC 2 / 3Axis Plug and play driver is compatible with all of the popular CNC Printer port driven software, including but not limited to Mach2 / 3, Turbo CNC, KCam etc the list go on …

The Routout CNC 2 / 3 Axis stepper motor driver Box will drive 2 / 3 X 6 Amp stepper motors and can be set to Half / Quarter / sixteenth stepping (Default configuration when shipped sixteenth step – 3200 steps per revolution)

Plasma controllers are supplied without CNC software. For more information on the software. Please visit the software page from our products page. All Plasma controllers are compatible with the ever increasing in popularity Mach 3 software.

 

Features.

  • 6 A Output Drive Capabilities. (we can supply specials up to 10 Amps)
  • Small Case Size foot print only 120mm x 75mm X 55mm
  • Internal 5V logic driver onboard (no need for 5v Supply)
  • Connection for Home Switches.
  • The Resolution can be change from the default setting via the internal jumpers ( please see the below table )
  • Simply plug and Play Very little wiring just connect motors and power supply
  • Supplied with Routout CNC software.
  • Supplied with all motor, Power Supply & Home switch connectors.
  • Connection for Limit and E - Stop.
  • Built in Power Supply.

To download the full spec sheet on the controller please click on the link below:

6 Amp Plug and Play 2/3/4 Axis controller PDF PDFLOGO


Computer minimum Requirements :

Windows 98,2000,XP
P2 - 500 Mhz or greater
1 spare Printer Port.

If you require any further information then please do not hesitate to contact us on Tel: (01269) 841230

Dedicated technical Help Line (0121) 2884066

Price 2 Axis £591.00 Including P&P to the UK Only

Price 3 Axis £648.00 Including P&P to the UK Only

For a 2Axis click below (£591.00)

 

For a 3 Axis click below (£648.00)


Simple to understand connection Diagrams.

For full details please download the manual by clicking on the image below.
 
 
             
   
Pictures and video below are courtesy of Lambodoors who use our drivers to run the machine they built.
      
   

Sample Plasma V's Laser Cut Parts.

(Quality is similar for both Plasma and laser)

      
   
     
             
   

Video of Mach 3 running A 3 axis Routout CNC Plasma controller . ( Click one to activate the video then Press play to run the video )