Routout CNC 2Axis - 10 Amp Microstepping Stepper Motor Driver Kit.

(2 X 10 Amp Drivers + LPT Quick Connector)

Description and Specification.

Routout CNC 10 Amp Drive Card.

Whether you are building your own CNC Machine/ converting an existing machine or you have simply bought a kit. The Routout CNC 10 Amp driver will enable you to do this with ease. (10 amp Driver will drive machines upto Bridgeport size or flat bed router tables in excess of 2.5 X 2.5 Meters.)

Features:

• 10A 37V Output Drive Capabilities.
• 1/2 , 1/4 and 1/6 Step modes
• 3V to 5V logic inputs.
• Synchronous Rectification for low power / heat dissipation
• Internal UVLO and Thermal shutdown circuitry.
• Small PCB foot print only 105mm x 123mm
• Internal 5V logic driver onboard (no need for 5v Supply)
• Enable – Turns the motor off when not being driven.
• Large built in heatsink with mounting flanges.
• Opto isolated Inputs
• Very simple to wire.
• Compatible with Mach 2 / 3 ,Routout CNC, KCam the list goes on.......
  
  What do I get in the 3 Axis Kit ?

  You get the following:

• 2 off 10 Amp Drivers
• 1 off Breakout Board
• Unlimited Telephone and email support.

Absolute Maximum Ratings:

• Power Supply Voltage 37 Volts DC

• Logic Input :
  Step / Direction / Enable Voltage
  Logic High Min 3.0 MAX 5 V
  Logic Low MAX 1.5 V

• VREF MAX Voltage 2 Volts

• MAX Output Current 10 A
  

To download the full spec sheet on the Drive Card please click on the link below:

10 Amp Drive Card PDF

If you require any further information then please do not hesitate to contact us on Tel: (01269) 841230

Dedicated technical Help Line (0121) 2884066

Price £ 120.00 Plus £6.50 P&P to the UK Only